メインコンテンツにスキップ

修理を始めるには

修理する権利

ストア

英語
日本語

手順 5を翻訳中

手順5
The USB board is secured to the display assembly with light adhesive. Depending on your carrier the USB board may have an additional antenna cable on the back side of the USB board. Pry very carefully and stop if you encounter resistance. Gently insert the flat end of a spudger beneath the USB board to free it from the adhesive holding it in place.
  • The USB board is secured to the display assembly with light adhesive.

  • Depending on your carrier the USB board may have an additional antenna cable on the back side of the USB board. Pry very carefully and stop if you encounter resistance.

  • Gently insert the flat end of a spudger beneath the USB board to free it from the adhesive holding it in place.

  • Go slow and be careful not to bend the board.

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります