メインコンテンツにスキップ
英語
日本語

手順 14を翻訳中

手順14
Reapply a thin coat of thermal paste to the back of the IC. Use a self tapping screw to attach it to the heatsink. Now is also a good time to properly mount the transformer. I used some M3x15mm machine screws.
  • Reapply a thin coat of thermal paste to the back of the IC. Use a self tapping screw to attach it to the heatsink.

  • Now is also a good time to properly mount the transformer. I used some M3x15mm machine screws.

  • With those repairs made, all that is left is to reassemble the AMP. In my case, this Amp worked after replacing the TDA2030A

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります