メインコンテンツにスキップ
英語
日本語

手順 9を翻訳中

手順9
Another odd looking piece is the location of the power Amp IC. The smudge marks of the thermal past revealed that the board was loose and the the IC did not make contact with the heatsink The thread in the heatsink was partially stripped. Use a small jewelers screwdriver to wedge under the screw,while using a #2 Philips screwdriver to remove it.
  • Another odd looking piece is the location of the power Amp IC.

  • The smudge marks of the thermal past revealed that the board was loose and the the IC did not make contact with the heatsink

  • The thread in the heatsink was partially stripped. Use a small jewelers screwdriver to wedge under the screw,while using a #2 Philips screwdriver to remove it.

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります