メインコンテンツにスキップ

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての43個のガイドに反映されます。

英語
イタリア語

手順 1を翻訳中

手順1
Stick a heavy-duty suction cup near each of the two top corners of the glass panel. To attach the suction cups, first position the suction cup with the movable handle parallel to the face of the glass panel (as highlighted in the second picture). While lightly holding the suction cup against the glass, raise the movable handle until it is parallel with the other handle (as highlighted by the third picture).
  • Stick a heavy-duty suction cup near each of the two top corners of the glass panel.

  • To attach the suction cups, first position the suction cup with the movable handle parallel to the face of the glass panel (as highlighted in the second picture).

  • While lightly holding the suction cup against the glass, raise the movable handle until it is parallel with the other handle (as highlighted by the third picture).

  • If your suction cups refuse to stick, try cleaning both the glass panel and the suction cup with a damp soft, lint-free cloth. (Dampen with distilled water, and if needed, an equal ratio of distilled water and white vinegar for best results.)

  • Do not use the suction cups to carry the display glass because if one of them fails to stick, you could drop the screen and break it.

  • The original iMac box makes a good place to store the glass panel. Otherwise, a padded horizontal surface, like a towel on a desk will do nicely.

Far aderire una ventosa accanto a ciascuno dei due angoli superiori del pannello di vetro.

Per far aderire le ventose, per prima cosa posizionarle con la maniglia semovente parallela alla superficie del pannello di vetro (come evidenziato nella prima e nella seconda immagine).

Tenendo delicatamente la ventosa contro il vetro, sollevare la maniglia semovente finché non è parallela all'altra maniglia (come evidenziato nella terza immagine).

Se la ventosa non aderisce, provare a ripulire il pannello di vetro e la ventosa con un solvente delicato.

Do not use the suction cups to carry the display glass because if one of them fails to stick, you could drop the screen and break it.

The original iMac box makes a good place to store the glass panel. Otherwise, a padded horizontal surface, like a towel on a desk will do nicely.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります