メインコンテンツにスキップ
英語
日本語

手順 4を翻訳中

手順4
The upper part of the coffee-tube is also clipsed in. Turn it and push the clips. It will snap off. There is no sealing-ring. The sealing-ring for this connection is inside the upper coffee-piston on top of the tube from the Crema-Valve. I show it later. The cover over the white gearwheel has 4 clipse, one at each corner. Use a small screwdriver to leverage it up.
  • The upper part of the coffee-tube is also clipsed in. Turn it and push the clips. It will snap off. There is no sealing-ring. The sealing-ring for this connection is inside the upper coffee-piston on top of the tube from the Crema-Valve. I show it later.

  • The cover over the white gearwheel has 4 clipse, one at each corner. Use a small screwdriver to leverage it up.

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります