メインコンテンツにスキップ

Fix Your Stuff

Right to Repair

Parts & Tools

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての9個のガイドに反映されます。

英語
中国語

手順 1を翻訳中

手順1
Remove the four 7.5 mm T8 screws from behind the GPU on the logic board. These screws are set inside large, spring-loaded Phillips #2 screws. To prevent the larger screws from spinning when you loosen the T8 screws, hold them with a fingertip or Phillips #2 screwdriver. These screws are set inside large, spring-loaded Phillips #2 screws. To prevent the larger screws from spinning when you loosen the T8 screws, hold them with a fingertip or Phillips #2 screwdriver.
  • Remove the four 7.5 mm T8 screws from behind the GPU on the logic board.

  • These screws are set inside large, spring-loaded Phillips #2 screws. To prevent the larger screws from spinning when you loosen the T8 screws, hold them with a fingertip or Phillips #2 screwdriver.

移除主板上,CPU背后的4颗 7.5毫米 T8 螺丝

这些螺丝安装在带有弹簧的十字螺母内。为防止当你松动 T8 螺丝时,螺母旋转,请用指尖或十字螺丝刀固定。

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります