メインコンテンツにスキップ

Fix Your Stuff

Right to Repair

Parts & Tools

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての9個のガイドに反映されます。

英語
フランス語

手順 1を翻訳中

手順1
Remove the four 7.5 mm T8 screws from behind the GPU on the logic board. These screws are set inside large, spring-loaded Phillips #2 screws. To prevent the larger screws from spinning when you loosen the T8 screws, hold them with a fingertip or Phillips #2 screwdriver. These screws are set inside large, spring-loaded Phillips #2 screws. To prevent the larger screws from spinning when you loosen the T8 screws, hold them with a fingertip or Phillips #2 screwdriver.
  • Remove the four 7.5 mm T8 screws from behind the GPU on the logic board.

  • These screws are set inside large, spring-loaded Phillips #2 screws. To prevent the larger screws from spinning when you loosen the T8 screws, hold them with a fingertip or Phillips #2 screwdriver.

Retirez les quatre vis T9 de 7,5 mm derrière le GPU sur la carte mère.

Ces vis sont fixées à l'intérieur de grandes vis cruciformes #2 à ressort. Pour éviter que les plus grandes vis ne tournent lorsque vous desserrez les vis T9, tenez-les du bout du doigt ou avec un tournevis cruciforme #2.

[* red] Remove the four 7.5 mm T9T8 screws from behind the GPU on the logic board.
[* icon_note] These screws are set inside large, spring-loaded Phillips #2 screws. To prevent the larger screws from spinning when you loosen the T9T8 screws, hold them with a fingertip or Phillips #2 screwdriver.
[* red] Remove the four 7.5 mm T9T8 screws from behind the GPU on the logic board.
[* icon_note] These screws are set inside large, spring-loaded Phillips #2 screws. To prevent the larger screws from spinning when you loosen the T9T8 screws, hold them with a fingertip or Phillips #2 screwdriver.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります