メインコンテンツにスキップ

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての24個のガイドに反映されます。

英語
中国語

手順 3を翻訳中

手順3
Do not attempt to remove the power supply from the case; it is still attached to the logic board by two cables. Move the power supply board towards the left edge of the case and up to free it from the notch in the logic board. Move the power supply board towards the left edge of the case and up to free it from the notch in the logic board.
  • Do not attempt to remove the power supply from the case; it is still attached to the logic board by two cables.

  • Move the power supply board towards the left edge of the case and up to free it from the notch in the logic board.

切勿尝试将电源与背壳移除,它仍有两条线缆与逻辑板相连。

先将电源向背壳的左边移动,然后再向上使其从逻辑板的插槽中取出。

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります