メインコンテンツにスキップ

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての24個のガイドに反映されます。

英語
イタリア語

手順 3を翻訳中

手順3
Do not attempt to remove the power supply from the case; it is still attached to the logic board by two cables. Move the power supply board towards the left edge of the case and up to free it from the notch in the logic board. Move the power supply board towards the left edge of the case and up to free it from the notch in the logic board.
  • Do not attempt to remove the power supply from the case; it is still attached to the logic board by two cables.

  • Move the power supply board towards the left edge of the case and up to free it from the notch in the logic board.

Non tentare di rimuovere l'alimentatore dal case; è ancora fissato alla scheda logica da due cavi.

Sposta la scheda dell'alimentatore verso il bordo sinistro del case e verso l'alto per liberarla dall'incavo nella scheda logica.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります