メインコンテンツにスキップ

修理を始めるには

修理する権利

ストア

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての43個のガイドに反映されます。

英語
中国語

手順 18を翻訳中

手順18
Only lift the display a few inches—it is still attached to the iMac by data and power cables. With the cards inserted as shown near the corners, gently twist the cards to increase the gap between display and case. If there are any sections that seem to stick and won't separate, stop twisting and use one of the cards to cut the adhesive in the problem area.
  • Only lift the display a few inches—it is still attached to the iMac by data and power cables.

  • With the cards inserted as shown near the corners, gently twist the cards to increase the gap between display and case.

  • If there are any sections that seem to stick and won't separate, stop twisting and use one of the cards to cut the adhesive in the problem area.

  • Begin to lift the top of the display up from the frame.

只把显示屏抬起几英寸——它仍然是通过数据和电力电缆连接到iMac上的。

将卡片插入到边角附近,轻轻地扭转卡片,以增加显示屏与外壳之间的距离。

如果有任何部分看起来粘在一起,并且不会分开,那就停止扭转卡片,用其中一张卡片在问题区域中切下胶粘剂。

开始从外壳中抬起显示屏的顶部。

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります