メインコンテンツにスキップ

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての43個のガイドに反映されます。

英語
中国語

手順 9を翻訳中

手順9
While the opening tool did the lion's share of the work, the display will still be slightly adhered to the case. A plastic card will be necessary to free up the last of this adhesive. Set the iMac face-up on a table. Starting from the top right corner of the iMac, insert a plastic card between the display and frame.
  • While the opening tool did the lion's share of the work, the display will still be slightly adhered to the case. A plastic card will be necessary to free up the last of this adhesive.

  • Set the iMac face-up on a table.

  • Starting from the top right corner of the iMac, insert a plastic card between the display and frame.

  • Be careful not to insert it more than 3/8" (9.5 mm), or you may damage internal components.

当打开显示屏的工具做了大部分工作之后,显示器仍然会轻微地粘附在外壳上。用一张塑料卡就可以把这种胶粘剂移除。

将iMac屏幕朝上放在桌面上。

从iMac的右上角开始,在显示屏和外壳之间插入一张塑料卡。

小心不要插入超过3 / 8英寸,否则会损坏内部组件。

[* icon_note] While the opening tool did the lion's share of the work, the display will still be slightly adhered to the case. A plastic card will be necessary to free up the last of this adhesive.
[* black] Set the iMac face-up on a table.
[* black] Starting from the top right corner of the iMac, insert a plastic card between the display and frame.
[* icon_caution] Be careful not to insert it more than 3/8"3/8" (9.5 mm), or you may damage internal components.
[* icon_caution] Be careful not to insert it more than 3/8"3/8" (9.5 mm), or you may damage internal components.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります