メインコンテンツにスキップ
英語
日本語

手順 3を翻訳中

手順3
Once you have verified that the power cord provides an adequate electrical connection, you will have to test that the cable is not shorted.
  • Once you have verified that the power cord provides an adequate electrical connection, you will have to test that the cable is not shorted.

  • Test for a potential short circuit by touching each prong on the AC side of the power cord.

  • If the multimeter beeps, your power cord is bad and must be replaced immediately.

  • If your power cord is shorted, do not attempt to replug the cord into the AC outlet.

  • If your power cord has passed all of the steps above, then you have successfully tested that your power cord is in working order.

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります