メインコンテンツにスキップ
英語
日本語

手順 2を翻訳中

手順2
With both thumb screws removed, the front bezel can now be easily pulled off. It is only held in place by three magnets. With the bezel out of the way, there will be a small cover held in place by a crossbar and a thumb screw.  Loosen the thumb screw and fold the bar out of the way. The back of the lamp housing is now visible.
  • With both thumb screws removed, the front bezel can now be easily pulled off. It is only held in place by three magnets.

  • With the bezel out of the way, there will be a small cover held in place by a crossbar and a thumb screw. Loosen the thumb screw and fold the bar out of the way.

  • The back of the lamp housing is now visible.

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります