メインコンテンツにスキップ

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての2個のガイドに反映されます。

英語
日本語

手順 7を翻訳中

手順7
Remove the two (2) Phillips #00 screws (3 mm) which attach the motherboard to the front casing. Carefully lift the motherboard off. The piece marked in the third image may be loose and fall out freely.  If it does not fall off, use your fingers or a plastic opening tool to snap it off.  Make sure to place it under the motherboard during reassembly, as found in the image.
  • Remove the two (2) Phillips #00 screws (3 mm) which attach the motherboard to the front casing.

  • Carefully lift the motherboard off.

  • The piece marked in the third image may be loose and fall out freely. If it does not fall off, use your fingers or a plastic opening tool to snap it off. Make sure to place it under the motherboard during reassembly, as found in the image.

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります