メインコンテンツにスキップ

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての2個のガイドに反映されます。

英語
日本語

手順 4を翻訳中

手順4
Unscrew the two (2) Phillips #00 screws (3 mm) attaching the scroll bar. Use a spudger to lift the flap vertically in the second image to release the scroll bar from the motherboard. The flap is connected via a hinge.  Once you lift the flap, it will stay up and the cable will be lose.  Remember to snap it back down during reassembly.
  • Unscrew the two (2) Phillips #00 screws (3 mm) attaching the scroll bar.

  • Use a spudger to lift the flap vertically in the second image to release the scroll bar from the motherboard.

  • The flap is connected via a hinge. Once you lift the flap, it will stay up and the cable will be lose. Remember to snap it back down during reassembly.

  • Do not pull the scroll bar off the device. Simply flip it around so it is out of the way for further disassembly, as seen in the third image.

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります