メインコンテンツにスキップ

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての2個のガイドに反映されます。

英語
日本語

手順 5を翻訳中

手順5
Lift the flap attaching the blue and white ribbon cable to the motherboard by lifting it vertically with the spudger. Lift the flap with the pointed-end of the spudger to detach the ribbon cable indicated in the second image. The flaps are connected via a hinge. Once you lift the flap, it will stay up and the cable will be lose. Remember to snap it back down during reassembly.
  • Lift the flap attaching the blue and white ribbon cable to the motherboard by lifting it vertically with the spudger.

  • Lift the flap with the pointed-end of the spudger to detach the ribbon cable indicated in the second image.

  • The flaps are connected via a hinge. Once you lift the flap, it will stay up and the cable will be lose. Remember to snap it back down during reassembly.

  • Use tweezers to pull the ribbon cable in the third image laterally to detach it.

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります