メインコンテンツにスキップ
英語
日本語

手順 5を翻訳中

手順5
Lift the flap attaching the blue and white ribbon cable to the motherboard by lifting it vertically with the pointed-end of the spudger. The flap is connected via a hinge.  Once you lift the flap, it will stay up and the cable will be lose.  Remember to snap it back down during reassembly.
  • Lift the flap attaching the blue and white ribbon cable to the motherboard by lifting it vertically with the pointed-end of the spudger.

  • The flap is connected via a hinge. Once you lift the flap, it will stay up and the cable will be lose. Remember to snap it back down during reassembly.

  • Carefully lift the ON/OFF Power and Wifi Switch vertically from the device motherboard.

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります