メインコンテンツにスキップ

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての46個のガイドに反映されます。

英語
イタリア語

手順 1を翻訳中

手順1
To ensure that everything is de-energized and won't turn on while you're working, it is recommended that you disconnect the battery. Grab the clear plastic pull tab attached to the battery connector and pull it parallel to the board toward the front edge of the Air.
  • To ensure that everything is de-energized and won't turn on while you're working, it is recommended that you disconnect the battery.

  • Grab the clear plastic pull tab attached to the battery connector and pull it parallel to the board toward the front edge of the Air.

  • Do not lift upward on the connector as you disconnect it or you risk damage to the connector socket.

Per assicurarti che nulla sia alimentato e non si possa accendere mentre stai lavorando, è raccomandato scollegare la batteria.

Afferra la piccola striscia di plastica trasparente attaccata al connettore della batteria e tirala parallelamente alla scheda verso il bordo anteriore dell'Air.

Non sollevare il connettore per disconnetterlo in quanto potresti danneggiarne l'alloggiamento.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります