メインコンテンツにスキップ
英語
日本語

手順 9を翻訳中

手順9
Do not remove the metal case from the panel yet. Slide it upward in the direction of the arrow, this will make the display data connector more accessible To remove the connector, squeeze both metal clips together. Remove the cable by gently pulling on the connector, not the cable. The panel and the metal case can now be separated. The power supply and the video board are both contained on the inside of the metal case.
  • Do not remove the metal case from the panel yet. Slide it upward in the direction of the arrow, this will make the display data connector more accessible

  • To remove the connector, squeeze both metal clips together. Remove the cable by gently pulling on the connector, not the cable.

  • The panel and the metal case can now be separated. The power supply and the video board are both contained on the inside of the metal case.

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります