Skip to main content
英語
日本語

手順 10を翻訳中

手順10
The console is held in place by the 4 inner screws, note you don't need to remove the outer screws or screws in the handlebars Note how the block attached to the lever is positioned against the switch. In my train this was 180degrees reversed and hence the lever did not do anything. The three buttons need to be correctly orientated, they have little bars to fit into slots
Removing the console
  • The console is held in place by the 4 inner screws, note you don't need to remove the outer screws or screws in the handlebars

  • Note how the block attached to the lever is positioned against the switch. In my train this was 180degrees reversed and hence the lever did not do anything.

  • The three buttons need to be correctly orientated, they have little bars to fit into slots

  • Note the newer model may look slightly different to this

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります