メインコンテンツにスキップ

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての5個のガイドに反映されます。

英語
日本語

手順 10を翻訳中

手順10
To remove the motherboard, gently pry it up with your finger from the charging port. Be careful not to yank the camera's ribbon cable as you lift the board.  Make sure that it is in line with its hole in the motherboard. Once the board has been lifted, remove it by pulling it away from the connected edge.
  • To remove the motherboard, gently pry it up with your finger from the charging port.

  • Be careful not to yank the camera's ribbon cable as you lift the board. Make sure that it is in line with its hole in the motherboard.

  • Once the board has been lifted, remove it by pulling it away from the connected edge.

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります