メインコンテンツにスキップ

ご注意:あなたは前提となるガイドを編集しています。あなたが行なう変更は、この手順を含むガイド全体に反映されます。

英語
フランス語

手順 13を翻訳中

手順13
Carefully remove the antenna assembly while simultaneously feeding the antenna cable bundle out from underneath the heat pipe. Remove the antenna cable assembly. During reassembly, gently pinch the cable bundle together and guide it under the heat pipe into the correct position on the board. If needed, use your tools to help guide it through, but don't force it.
  • Carefully remove the antenna assembly while simultaneously feeding the antenna cable bundle out from underneath the heat pipe.

  • Remove the antenna cable assembly.

  • During reassembly, gently pinch the cable bundle together and guide it under the heat pipe into the correct position on the board. If needed, use your tools to help guide it through, but don't force it.

Ôtez soigneusement l'ensemble antenne tout en faisant soigneusement sortir le faisceau de câbles d'antenne sous le caloduc.

Ôtez l'ensemble antenne.

Lors du remontage, pincez délicatement le faisceau de câbles et faites-le passer sous le caloduc afin de le positionner correctement. Si nécessaire, aidez-vous de vos outils, mais ne forcez pas.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります