メインコンテンツにスキップ
英語
日本語

手順 15を翻訳中

手順15
Don't try to completely remove the screen yet. There are still two cables routed through the frame. Hold the top half of the frame up so that the touch layer cable can be threaded through its cutout.
Remove the screen
  • Don't try to completely remove the screen yet. There are still two cables routed through the frame.

  • Hold the top half of the frame up so that the touch layer cable can be threaded through its cutout.

  • Lift the screen up by its top half while threading the touch layer cable through its cutout in the frame.

  • Don't lift the screen higher than about a 30 degree angle above the frame to avoid damaging the display cable.

  • If the screen does not easily lift off the frame, you may need to cut through more of the perimeter adhesive or apply more isopropyl alcohol to the inner adhesive.

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります