Skip to main content
英語
日本語

手順 16を翻訳中

手順16
Set the optical drive assembly into the optical drive bay. There are two screws that line up onto a track in the bottom of the bay.
  • Set the optical drive assembly into the optical drive bay. There are two screws that line up onto a track in the bottom of the bay.

  • Warning: Carefully route the cabling so that it is not pinched or disconnected when fitting the carrier into the optical bay.

  • Fully insert so the drive assembly is flush with the bay.

  • New optical drive is installed. Reassemble Mac Pro.

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります