メインコンテンツにスキップ
英語
日本語

手順 7を翻訳中

手順7
Now back to the phone. We are now at the circuit board. There is one connection to the screen on the back of the board (see pictures). We need to separate it from the board. Use tweezers to carefully lift the click connector. Next there are two clips on the board. Use tweezers to push one in, then push the other in and lift the board. It’s now off! Now back to the phone. We are now at the circuit board. There is one connection to the screen on the back of the board (see pictures). We need to separate it from the board. Use tweezers to carefully lift the click connector. Next there are two clips on the board. Use tweezers to push one in, then push the other in and lift the board. It’s now off! Now back to the phone. We are now at the circuit board. There is one connection to the screen on the back of the board (see pictures). We need to separate it from the board. Use tweezers to carefully lift the click connector. Next there are two clips on the board. Use tweezers to push one in, then push the other in and lift the board. It’s now off!
Circuit Board
  • Now back to the phone. We are now at the circuit board. There is one connection to the screen on the back of the board (see pictures). We need to separate it from the board. Use tweezers to carefully lift the click connector. Next there are two clips on the board. Use tweezers to push one in, then push the other in and lift the board. It’s now off!

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります