メインコンテンツにスキップ
英語
日本語

手順 5を翻訳中

手順5
Be careful, this temporary repair is very fragile. Do not apply any tension on the USB connector or with the USB cable.
  • Be careful, this temporary repair is very fragile. Do not apply any tension on the USB connector or with the USB cable.

  • Before to continue, you should ensure one more time that the connectors are well in place to prevent from any short circuit. I recommend to:

  • First, plug and apply the electrical power on the logic board only do not plug the hard drive or even the USB connector. Wait for a minute if everything goes well!

  • You should use a hold computer if any available to you. Your computer should be protected from a short circuit here but we never know. Please don't use your brand new computer!

  • When you are ready to go:

  • Plug the hard drive with the USB/SATA bridge throug the SATA connector.

  • Carefully plug the USB connector to the logic board and your computer.

  • Apply electrical power on the hard drive.

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります