メインコンテンツにスキップ
英語
日本語

手順 3を翻訳中

手順3
Once the blade can make it down a full row, tilt the blade side to side to straighten the pins on each flanking row. This motion doesn't require too much force, and should only be used to bend each pin row slightly. This motion doesn't require too much force, and should only be used to bend each pin row slightly.
Begin to straighten the pins
  • Once the blade can make it down a full row, tilt the blade side to side to straighten the pins on each flanking row.

  • This motion doesn't require too much force, and should only be used to bend each pin row slightly.

ナイフ全体が1列分配置できたら、ナイフを左右に傾けながら、横の列のピンをまっすぐ揃えます。

この作業では、あまり力を必要とせず、各ピン列をわずかに曲げる程度で構いません。

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります