メインコンテンツにスキップ
英語
日本語

手順 13を翻訳中

手順13
Use a Phillips screwdriver to remove the 8.5 mm-long screw securing the controller board to the hard drive. Slide the controller board straight off the end of the hard drive to remove it. There will be a bit of resistance when removing this board, since it's connected to the hard drive's SATA and power connectors.
Remove the controller board
  • Use a Phillips screwdriver to remove the 8.5 mm-long screw securing the controller board to the hard drive.

  • Slide the controller board straight off the end of the hard drive to remove it.

  • There will be a bit of resistance when removing this board, since it's connected to the hard drive's SATA and power connectors.

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります