メインコンテンツにスキップ
英語
イタリア語

手順 2を翻訳中

手順2
Insert a Jimmy into the seam between the frame and the cover on one side of the drive, roughly halfway between the top and bottom. You may need to wiggle the Jimmy in order to slide it in between the frame and the cover.
Insert a Jimmy into the seam of the enclosure
  • Insert a Jimmy into the seam between the frame and the cover on one side of the drive, roughly halfway between the top and bottom.

  • You may need to wiggle the Jimmy in order to slide it in between the frame and the cover.

Inserisci un "Jimmy" o spatola metallica nella fessura tra la scocca e la cover su uno dei lati del drive, all'incirca a metà strada tra la base e la cima dell'unità.

Può essere necessario muovere la spatola variandone l'inclinazione per riuscire a infilarla nella giunzione.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります