メインコンテンツにスキップ
英語
日本語

手順 1を翻訳中

手順1
Remove the three 12.7 mm screws from the truss rod cap on the head-stock with a Phillips #0 screwdriver. Start with the bottom two screws. This will allow you to use the the third as a pivot to help with getting the cap out from under the strings.
  • Remove the three 12.7 mm screws from the truss rod cap on the head-stock with a Phillips #0 screwdriver.

  • Start with the bottom two screws. This will allow you to use the the third as a pivot to help with getting the cap out from under the strings.

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります