メインコンテンツにスキップ

ご注意:あなたは前提となるガイドを編集しています。あなたが行なう変更は、この手順を含むガイド全体に反映されます。

英語
スペイン語

手順 8を翻訳中

手順8
Continue sliding the opening pick around the right edge of the screen, slicing the adhesive. The screen and digitizer cables are placed in a way to prevent them from easily snagging on the opening pick, but still use caution when sliding the opening pick along the gap. The screen and digitizer cables are placed in a way to prevent them from easily snagging on the opening pick, but still use caution when sliding the opening pick along the gap.
  • Continue sliding the opening pick around the right edge of the screen, slicing the adhesive.

  • The screen and digitizer cables are placed in a way to prevent them from easily snagging on the opening pick, but still use caution when sliding the opening pick along the gap.

Calienta la parte trasera de la pantalla a lo largo del borde derecho durante 1-2 minutos para ayudar a suavizar el adhesivo.

La pantalla y los cables del digitalizador se colocan de forma que no se enganchen fácilmente en el pico de la apertura, pero aún así hay que tener cuidado al deslizar el pico de la apertura a lo largo del hueco.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります