メインコンテンツにスキップ

ご注意:あなたは前提となるガイドを編集しています。あなたが行なう変更は、この手順を含むガイド全体に反映されます。

英語
ドイツ語

手順 8を翻訳中

手順8
Continue sliding the opening pick around the right edge of the screen, slicing the adhesive. The screen and digitizer cables are placed in a way to prevent them from easily snagging on the opening pick, but still use caution when sliding the opening pick along the gap. The screen and digitizer cables are placed in a way to prevent them from easily snagging on the opening pick, but still use caution when sliding the opening pick along the gap.
  • Continue sliding the opening pick around the right edge of the screen, slicing the adhesive.

  • The screen and digitizer cables are placed in a way to prevent them from easily snagging on the opening pick, but still use caution when sliding the opening pick along the gap.

Schiebe das Plektrum weiter an der rechten Kante entlang, um den Kleber aufzutrennen.

Die Display- und Touchscreen-Kabel verlaufen so, dass sie normalerweise nicht leicht am Plektrum hängen bleiben können. Sei aber trotzdem vorsichtig, wenn du das Plektrum am Spalt entlang führst.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります