メインコンテンツにスキップ

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての2個のガイドに反映されます。

英語
イタリア語

手順 9を翻訳中

手順9
When removing and installing the logic board, take care not to damage the delicate microphone ribbon cable at the bottom left of the board. Tilt the logic board slightly forward. Lift the logic board straight up and out of the iMac. Be careful not to snag it on any of the screw posts attached to the inside of the rear case.
  • When removing and installing the logic board, take care not to damage the delicate microphone ribbon cable at the bottom left of the board.

  • Tilt the logic board slightly forward.

  • Lift the logic board straight up and out of the iMac. Be careful not to snag it on any of the screw posts attached to the inside of the rear case.

Mentre rimuovi e installi la scheda madre, stai attento a non danneggiare il delicato cavo a nastro del microfono in basso a sinistra sulla scheda.

Inclina leggermente in avanti la scheda.

Solleva la scheda madre e rimuovila dall'iMac. Stai attento a non rompere nessuna delle prese per le viti fissate all'interno della copertura posteriore.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります