メインコンテンツにスキップ

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての2個のガイドに反映されます。

英語
イタリア語

手順 7を翻訳中

手順7
Pull the hard drive SATA cable and connector through the right hard drive bracket. Move the cable to the right side of the iMac, out of the way of the exhaust port. Don't attempt to completely remove the cable—it can't be removed just yet, but will get in the way of removing the logic board. Don't attempt to completely remove the cable—it can't be removed just yet, but will get in the way of removing the logic board.
  • Pull the hard drive SATA cable and connector through the right hard drive bracket. Move the cable to the right side of the iMac, out of the way of the exhaust port.

  • Don't attempt to completely remove the cable—it can't be removed just yet, but will get in the way of removing the logic board.

Tira il cavo SATA del disco rigido e il connettore attraverso la staffa destra del disco rigido. Sposta il cavo alla destra dell'iMac, lasciando libera la porta dello scarico.

Non cercare di rimuovere del tutto il cavo: non può ancora essere rimosso, ma intralcerà la rimozione della scheda madre.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります