メインコンテンツにスキップ

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての2個のガイドに反映されます。

英語
スペイン語

手順 7を翻訳中

手順7
Pull the hard drive SATA cable and connector through the right hard drive bracket. Move the cable to the right side of the iMac, out of the way of the exhaust port. Don't attempt to completely remove the cable—it can't be removed just yet, but will get in the way of removing the logic board. Don't attempt to completely remove the cable—it can't be removed just yet, but will get in the way of removing the logic board.
  • Pull the hard drive SATA cable and connector through the right hard drive bracket. Move the cable to the right side of the iMac, out of the way of the exhaust port.

  • Don't attempt to completely remove the cable—it can't be removed just yet, but will get in the way of removing the logic board.

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります