メインコンテンツにスキップ

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての2個のガイドに反映されます。

英語
イタリア語

手順 5を翻訳中

手順5
Use the tip of a spudger to flip open the retaining flap on the microphone ribbon cable ZIF socket. Be sure you are prying up on the hinged retaining flap, not the socket itself. Use tweezers to gently pull the microphone ribbon cable straight out of its socket.
  • Use the tip of a spudger to flip open the retaining flap on the microphone ribbon cable ZIF socket.

  • Be sure you are prying up on the hinged retaining flap, not the socket itself.

  • Use tweezers to gently pull the microphone ribbon cable straight out of its socket.

Usa la punta di uno spudger per aprire, ruotandola, l'aletta di bloccaggio sul connettore ZIF del cavo a nastro del microfono.

Assicurati di star facendo leva sull'aletta di bloccaggio incernierata e non sulla presa.

Usa delle pinzette per sfilare delicatamente il cavo a nastro del microfono dalla sua presa.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります