メインコンテンツにスキップ

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての2個のガイドに反映されます。

英語
イタリア語

手順 2を翻訳中

手順2
Use the point of a spudger to disconnect each of the four antenna connectors from the AirPort/Bluetooth card. Note the original positions for each connector when reconnecting the cables. From left to right on the card, the antennas are connected in the following order: Leftmost
  • Use the point of a spudger to disconnect each of the four antenna connectors from the AirPort/Bluetooth card.

  • Note the original positions for each connector when reconnecting the cables. From left to right on the card, the antennas are connected in the following order:

  • Leftmost

  • Top

  • Upper right

  • Lower right

Usa la parte piatta di uno spudger per scollegare tutti i quattro connettori delle antenne dalla scheda AirPort/Bluetooth.

Ricordati la posizione originale di ogni connettore mentre ricolleghi i cavi. Da sinistra a destra, sulla scheda, i connettori sono collegati nel seguente ordine:

Il più a sinistra

Quello in alto

Quello sopra a destra

Quello sotto a destra

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります