Skip to main content
英語
日本語

手順 2を翻訳中

手順2
The battery is connected to the board by a cable ending in a white connector on the board (shown  in picture 1). We'll need to pull that out. The battery is then lifted by its lower half and, when reaching about 50-60 degrees, allows itself to be pulled out, revealing the phone's SIM card slot and info. The battery is then lifted by its lower half and, when reaching about 50-60 degrees, allows itself to be pulled out, revealing the phone's SIM card slot and info.
  • The battery is connected to the board by a cable ending in a white connector on the board (shown in picture 1). We'll need to pull that out.

  • The battery is then lifted by its lower half and, when reaching about 50-60 degrees, allows itself to be pulled out, revealing the phone's SIM card slot and info.

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります