メインコンテンツにスキップ

ご注意:あなたは前提となるガイドを編集しています。あなたが行なう変更は、この手順を含むガイド全体に反映されます。

英語
日本語

手順 5を翻訳中

手順5
Remove the nut and washer holding the 6.25mm guitar input jack to the chassis Disconnect any wires going from the board to other parts of the chassis, such as to the power switch or power transformer Identify and remove any other screws that might prevent removal of the board. On my Ibanez, two screws held the power amplifier IC heat-sink to the chassis. Removal of the screws and their accompanying lock washers allowed the board to be lifted off with the heat-sink
Main board removal
  • Remove the nut and washer holding the 6.25mm guitar input jack to the chassis

  • Disconnect any wires going from the board to other parts of the chassis, such as to the power switch or power transformer

  • Identify and remove any other screws that might prevent removal of the board. On my Ibanez, two screws held the power amplifier IC heat-sink to the chassis. Removal of the screws and their accompanying lock washers allowed the board to be lifted off with the heat-sink

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります