メインコンテンツにスキップ

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての4個のガイドに反映されます。

英語
フランス語

手順 8を翻訳中

手順8
Once you're satisfied that the top half of the adhesive strip is neatly aligned, peel longer blue piece of backing out from behind the strip. If the top half isn't aligned properly, you can carefully peel it up and re-stick it before peeling off the lower backing strip. Be sure to use the spudger tip to anchor the top. If the top half isn't aligned properly, you can carefully peel it up and re-stick it before peeling off the lower backing strip. Be sure to use the spudger tip to anchor the top.
  • Once you're satisfied that the top half of the adhesive strip is neatly aligned, peel longer blue piece of backing out from behind the strip.

  • If the top half isn't aligned properly, you can carefully peel it up and re-stick it before peeling off the lower backing strip. Be sure to use the spudger tip to anchor the top.

Une fois que la moitié supérieure de la bande adhésive est parfaitement alignée, retirez le long film bleu derrière la bande.

Si la moitié supérieure n'est pas correctement alignée, vous pouvez la décoller soigneusement et la recoller avant de décoller le film. Assurez-vous d'utiliser la pointe de la spatule pour aligner le haut.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります