メインコンテンツにスキップ
英語
日本語

手順 11を翻訳中

手順11
After a couple minutes, retrieve your first plastic card and insert one corner under the top edge of one of the center battery cells. Wiggle it from side to side and slide it underneath the battery cell until all the adhesive separates. If you have trouble, don't use excessive force and don't deform the battery. Apply more adhesive remover and try again, or skip down two steps for an alternate method.
  • After a couple minutes, retrieve your first plastic card and insert one corner under the top edge of one of the center battery cells.

  • Wiggle it from side to side and slide it underneath the battery cell until all the adhesive separates.

  • If you have trouble, don't use excessive force and don't deform the battery. Apply more adhesive remover and try again, or skip down two steps for an alternate method.

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります