メインコンテンツにスキップ

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての7個のガイドに反映されます。

英語
中国語

手順 1を翻訳中

手順1
Use a pair of tweezers to lift up the black adhesive pull tab at the bottom of the right speaker, enough so you can grab it with your fingers. Grab the adhesive strip pull tab and slowly and carefully pull the adhesive strip out from under the speaker. Keep the angle of the adhesive strip as parallel to the laptop as you can. Try to avoid dragging it across the inside of the case.
Remove the right speaker adhesive
  • Use a pair of tweezers to lift up the black adhesive pull tab at the bottom of the right speaker, enough so you can grab it with your fingers.

  • Grab the adhesive strip pull tab and slowly and carefully pull the adhesive strip out from under the speaker.

  • Keep the angle of the adhesive strip as parallel to the laptop as you can. Try to avoid dragging it across the inside of the case.

  • If the adhesive strip breaks, leave it in and proceed to the next step.

用镊子将右扬声器底部的黑色粘性拉条抬起,足以用手指抓住它。

抓住胶带的拉条,然后缓慢小心地将胶带从扬声器下方拉出。

尽可能使胶带的角度与笔记本电脑平行。尽量避免将其拖到内部。

如果胶带断裂,则将其留在里面并继续下一步。

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります