Skip to main content
英語
日本語

手順 10を翻訳中

Step 10
Remove the two 1/4" screws using the nut driver. The second screw is located behind the right side of the 100 pin connector. Gently pry up the motherboard from the connector on top of the power supply.
  • Remove the two 1/4" screws using the nut driver.

  • The second screw is located behind the right side of the 100 pin connector.

  • Gently pry up the motherboard from the connector on top of the power supply.

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります