メインコンテンツにスキップ
英語
日本語

手順 3を翻訳中

手順3
Use the pointy end of the small tool that comes with the Skate Tool  and insert it under the bearing (look at the red arrow) to pry (and we mean PRY) out one of the bearings. We recommend starting with the bearing on side of the wheel that stays closest to the board and prying in the direction of the green arrow. We recommend starting with the bearing on side of the wheel that stays closest to the board and prying in the direction of the green arrow.
  • Use the pointy end of the small tool that comes with the Skate Tool and insert it under the bearing (look at the red arrow) to pry (and we mean PRY) out one of the bearings.

  • We recommend starting with the bearing on side of the wheel that stays closest to the board and prying in the direction of the green arrow.

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります