メインコンテンツにスキップ
英語
イタリア語

手順 8を翻訳中

手順8
Make sure that the door is level with the opposite door. Make sure that the magnetic strip is at the same depth you measured in step 2. Place the top bracket over the bolts. Tighten the three 10 mm nuts to hold the bracket in place.
Finishing the replacement
  • Make sure that the door is level with the opposite door.

  • Make sure that the magnetic strip is at the same depth you measured in step 2.

  • Place the top bracket over the bolts. Tighten the three 10 mm nuts to hold the bracket in place.

  • Replace the bracket cover and snap it back into place.

  • Test the door opening and closing before filling the shelves on the refrigerator door.

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります