Huawei P30 Pro Screen & Digitizer Replacement

ガイドの前提条件

この翻訳が完了したとみなされる前に、全ての必須条件ガイドを翻訳する必要があります。

Huawei P30 Pro Rear Glass Replacement

Huawei P30 Pro Motherboard Cover with NFC & Charging Coil Replacement

Huawei P30 Pro Battery Disconnect Procedure

Huawei P30 Pro Daughterboard Cover Replacement

Huawei P30 Pro Main Flex Cable Connectors Replacement

Huawei P30 Pro Charging Port with Main Flex Cable Replacement

Huawei P30 Pro Battery Replacement

ガイド情報

= 完了 = 不完全

交換する部品は何ですか？

タイトル

概要

はじめに

Use this guide to replace a broken or defective OLED Screen & Digitizer in your Huawei P30 Pro.

'''Note''': This guide instructs you to replace only the screen while leaving the original frame and motherboard in place. However, some replacement screens for this phone come pre-installed in a new frame (a.k.a. chassis), which requires a very different procedure. Make sure you have the correct part before starting this guide.

Opening the Huawei P30 Pro will '''damage the waterproof sealing''' on the device. If you do not replace the adhesive seals, your phone will '''function normally''' but will '''lose its water-protection'''.

Due to the phone’s design, you need to remove the lithium-ion battery in order to remove the screen. '''Reusing a deformed battery after it been removed is a potential safety hazard. Replace it with a new battery.'''

'''Before disassembling your phone, discharge the battery below 25%'''. The battery can catch fire and/or explode if accidentally punctured, but the chances of that happening are much lower if discharged.

You’ll need '''replacement adhesive''' to reattach components when reassembling the device.[br]
[br]

終わりに