メインコンテンツにスキップ
英語
日本語

手順 3を翻訳中

手順3
The single PCB is secured with 2 cross head screws and a ribbon cable which leads to the "display".
Removing the Main Electronics
  • The single PCB is secured with 2 cross head screws and a ribbon cable which leads to the "display".

  • By lifting the tightening cover of the ribbon cable you can remove it.

  • By removing the 2 standard screws you can finally completely remove the PCB from the assembly.

  • Pay attention to the before mentioned cogwheel. It will also fall out.

  • Additionally there are two plastic pins which transfer button pushes from to the PCB. More for that to come when looking at the PCBs.

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります