メインコンテンツにスキップ
英語
日本語

手順 2を翻訳中

手順2
Removing the cover which has the "tado" logo embossed is the first step to getting into the thermostat. It is secured with 3 clips. One right next to the little opening for the temperature sensor .
Getting into the Shell
  • Removing the cover which has the "tado" logo embossed is the first step to getting into the thermostat.

  • It is secured with 3 clips.

  • One right next to the little opening for the temperature sensor .

  • Two other on the opposite side.

  • Once you removed the cover you can easily pry off the serrated ring. This serration is connected to a little cogwheel which transfers the turning motion to an electrical signal for setting the temperature.

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります