メインコンテンツにスキップ
英語
日本語

手順 4を翻訳中

手順4
Apply a suction cup to the heated edge of the display, as close to the edge as possible. If your screen is badly cracked, covering it with a layer of clear packing tape may allow the suction cup to adhere. Alternatively, very strong tape may be used instead of the suction cup. If all else fails, you can superglue the suction cup to the broken display. Pull up on the suction cup with strong, steady force to create a gap between the display and the frame.
Slice the left side adhesive
  • Apply a suction cup to the heated edge of the display, as close to the edge as possible.

  • If your screen is badly cracked, covering it with a layer of clear packing tape may allow the suction cup to adhere. Alternatively, very strong tape may be used instead of the suction cup. If all else fails, you can superglue the suction cup to the broken display.

  • Pull up on the suction cup with strong, steady force to create a gap between the display and the frame.

  • Depending on the age of your phone, this may be difficult. If you are having trouble, apply more heat to the edge and try again.

  • Insert the point of an opening pick into the gap.

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります