メインコンテンツにスキップ

修理を始めるには

修理する権利

ストア

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての9個のガイドに反映されます。

英語
スペイン語

手順 3を翻訳中

手順3
Use a T5 Torx driver to remove the following screws securing the right speaker to the upper case: One black 6.8 mm screw
  • Use a T5 Torx driver to remove the following screws securing the right speaker to the upper case:

  • One black 6.8 mm screw

  • One silver 6.3 mm screw

  • One black 4.9 mm screw

  • The silver screw (in the corner) may be covered with a foam pad. If so, use your tweezers to peel it up and remove it.

Remueve los siguientes tornillos que sujetan el altavoz derecho a la caja superior.

Un tornillo Torx T5 de 6.8 mm

Dos tornillos Torx T5 de 6.3 mm

El tornillo de la esquina podría estar cubierto con una almohadilla de espuma. Utiliza tu pincita para removerla.

[* black] RemoveUse a T5 Torx driver to remove the following screws securing the right speaker to the upper case:
[* red] One black 6.8 mm T5 Torx screw
[* orange] TwoOne silver 6.3 mm T5 Torx screwsscrew
[* yellow] One black 4.9 mm screw

[* icon_note] The cornersilver screw (in the corner) may be covered with a foam pad. If so, use your tweezers to peel it up and remove it.
[* black] RemoveUse a T5 Torx driver to remove the following screws securing the right speaker to the upper case:
[* red] One black 6.8 mm T5 Torx screw
[* orange] TwoOne silver 6.3 mm T5 Torx screwsscrew
[* yellow] One black 4.9 mm screw

[* icon_note] The cornersilver screw (in the corner) may be covered with a foam pad. If so, use your tweezers to peel it up and remove it.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります